Tuesday, January 5, 2016

Star Wars: Battlefront(2015)

by Helifax and DHR




The fix has been released for some time now but I forgot to put it on HelixMod.
I am not going to copy-paste it here (Sorry) but you can view it on Geforce 3D Vision Forums here:
Star Wars: Battlefront - 3D Vision

27 comments:

  1. Time to buy the game. Thank you sir.

    ReplyDelete
  2. 3d bad. highly stretched in a tunnel and without the required volume

    ReplyDelete
    Replies
    1. Did you adjust convergence? The screen shots above do not show what you are describing.

      Delete
  3. No issues like that for me at max Depth. But occasionally elements will be rendered in 2d on area transition. (same issue as dragonage)

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete
  5. This comment has been removed by the author.

    ReplyDelete
  6. hello

    thank you for the fix.
    Infortunaly, there is a problem. When i put the depth at 100 %, the depth always "initialize" itself by default (15%)
    at the moment when i try to move in the game using keyboard (in the start of a game).

    how to fix this please ?

    ReplyDelete
  7. I always put the depth amount at 100% in all games without problems.
    For SW battlefront 2015, i mean the problem is about the depth amount which ALWAYS initialize to 15% (default depth amount) if i try to go "Forward". That's strange. I can go in all other directions, the depth amount keeps 100%

    ReplyDelete
  8. I have much Problems with this fix...
    in compartible Mode the 3d is not so "good" because of flat pop outs
    without compartible mode the 3d effect is horrible, many shaders wrong, some things (like rocks) renderd in 2d
    what i hav done wrong?
    I User nvidia 3dtv play at 24hz

    ReplyDelete
  9. I have found the Problem...
    I must start the game without v-sync and reenable it when mission is loaded.
    but every time after that with enabled vsync load a new mission the 3d is wrong.
    but without vsync i get headache, becaus bothy eyes arent syncron.
    the loading times are too so bad up tu 5 miniutes...

    ReplyDelete
  10. This comment has been removed by the author.

    ReplyDelete
  11. 3D Vision fix + custom made Helifax SW Battlefront profile work great for Need for Speed as well.

    ReplyDelete
    Replies
    1. man what?? you should post that into the helixmod Need For Speed section (or create one or contact Helifax) there is a lot people waiting for that me included xD

      Delete
    2. don't konw how you did that but it's not working for me..

      Delete
    3. please admin can you make sure if what he is saying is true so we can create a thread about NFS16, otherwise better to delete this comments so people don't waste their time by trying this.
      Thanks,

      Delete
  12. Many thanks - looks brilliant in 3D now!

    ReplyDelete
  13. No longer boots with fix installed. Loading screen then auto closes

    ReplyDelete
    Replies
    1. Just tested this, and it was working fine here. Win 10 1903, Driver 446.14. Origin version.

      Delete
  14. Just re-visited this game in 3D due to upgrading my PC's 2011 parts to 2020 parts - and works great, except the training level "Endor Chase" - that shuts down the PC as soon as the level loads, without CPU and GPU temps being particularly high.

    Has anyone else found this, and is there a work-around? I can't see anything particularly power-hungry in that level versus the other working training levels (e.g. "Beggars Canyon" and "Overpower" work just fine)

    P.S. And yes I have turned off Over-lays.

    ReplyDelete
    Replies
    1. Are you overclocking, or have factory overclocked parts? There are even some scenarios where you actually need to underclock your GPU, because of the way the games exercise the parts. In DeusEx:MD for example, there was a section that I had to *underclock* my normal GPU because otherwise the game would crash. Temps were fine, but the game somehow exercised the GPU in a way that no benchmark or stress did. Lots of threads on this game.

      Delete
    2. You were totally right, Bo3b -

      My Asus Strix GTX 970 has three presets -

      1) Silent Mode - Memory clock @ 6990 (MHz?) - and GPU Boost clock @ 1233 MHz

      2) Gaming Mode - 7010 - and 1253

      3) OC Mode - 7030 and - 1273


      I always play any game on the OC mode, but with the twin fans set to a constant 100% (rather than relying on the fans to speed up / slow dowm themselves).


      So following your post, I did the same thing to the "Gaming" (middle) and "Silent" (lowest) presets - i.e. I saved them as my own, but with the two fans running 100% all the time.

      I tried "Endor chase" with the Silent + 100% Fans preset - and it works perfectly now in both 3D and 2D.

      Thanks very much...I had no idea one had to sometimes use lower presets - even on a Factory OC card...

      Hmm...this could also be why "Total War Shogun 2" and "Far Cry 4" used to shut down my original parts PC a lot (I haven't played them with my new upgraded hardware yet...) - I assumed it was the old CPU over-heating...but sometimes that wasn't even the case...just very random shut-downs.

      I will try the Silent 100% Fan profile on those two games too.

      Lastly - amazing job on the 3D fix for this game, you guys! Unlike most other games, I actually preferred the "Toyification" look on my X-wing in "Beggars Canyon" - your 3D makes the Rebel and Imperial fighters look like those Star Wars toys from the late 70s / early 80s!

      (the only down-side with having Toy-mode (i.e. high Convergence) is it sometimes gives me a bit of headache between the eyes...no idea why)

      Delete
  15. I did overclock my new cpu etc, but then went back to Stock.
    My i5 9600-K @ 3.7 Ghz still turbos to between 4.3 and 4.6 Ghz though.

    Graphics card is a Factory OC Asus Strix GTX 970...in the morning I'll try to turn it off OC mode based on your above comment.
    Thank you

    ReplyDelete
  16. P.S. In OC mode, the GTX 970 according to GPU TWEAK II is constantly running at 99%...although the other game levels are fine with that.

    ReplyDelete
  17. Hi mates...where i can download this fix? The link to geforce page is obviously broken. ThanKs for any advice!

    ReplyDelete
    Replies
    1. Not sure, but maybe this is the fix file: https://dhr.s3.amazonaws.com/STAR.WARS.Battlefront.3Dfix.zip

      Please let us know if that works.

      Delete
    2. yes it works! But is it a universal fix, no? So no keys to adjust things like separation, convergence, etc. Also some few text and icons are not that good. I guess that at that time (2016) we had another one that uses this universal fix but with already some adjusts for this game. And it is now lost on geforce forum.

      Delete
  18. Everything works great for me, only 1 issue, the "written words" are rendered with a convergence very far from the ideal. I mean, I set the convergence to have a good image, but to be able to read the writing I have to change convergence too much. The HUD otherwise, is ok. Is this a known issue or can it be fixed somehow? 2080ti, drivers 452.06, 3d fix manager, fix installed, NVIDIA profile changed (I followed the instruction to change it with Geforce 3D Profile Manager. Thank you

    ReplyDelete