Truberbrook - 3D-Vision-Fix - DSS-Losti - V1.00

Truberbrook - 3D-Vision-Fix - DSS-Losti - V1.00

***This fix was made by Losti with DSS UNITY Script***

---------LATEST official 3D-Vision-Geforce Driver: 425.31----------

You can install 3D-Vision for the lates driver using this Method discriped here: https://www.mtbs3d.com/phpbb/viewtopic.php?f=105&t=23277

Optional donation:

If you like the fix and want to contribute for more future fixes, you can donate here: http://paypal.me/Losti3D

Special Thx goes to:

DarkStarSword  - for UNITY-AutoFix Script - donate https://www.paypal.me/DarkStarSword

DarkStarSword  - for everything you did for this small but nice 3D-Community and of cause your personal support!!! - donate (https://www.paypal.me/DarkStarSword) or support @ https://www.patreon.com/DarkStarSword

                          

masterotaku - for guiding me with his knowledge and be present all the time for my questions!!!! THY MATE!!!! - donate @ masterotakusuko@gmail.com

_________________________________________________

--- ~2 hr time of development later ---                      

_________________________________________________

Update: V1.00 - 13.10.2019
- release

1.  Fixed

- everything by DSS UNITY Script Auto-fix except:
- HUD (Losti) - Depth buffer is making strange things, hence no depth buffer mouse !

2.  Issues left

- nothing seen, means:

You have other issues and/or can present a savegame with a static scene having an issue???? --- please privide a screenshot and a savegame to rauti@inetmx.de

3.  Download

- Truberbrook_3D-VisionReady_Fix_by_DSS_and_Losti_V1.0

4.  Introduction to get it working

- be sure to remove old versions using uninstall.bat
- copy archive files to ...GAMEDIRECTORY\
- start the game with START.cmd
- ensure full screen in game
- you may have to restart your PC or restart the game several times until its kick in!!
- press ALT+TAB and back if you have  changed settings or restart the game
- for 3D-mode like SBS and so on please edit the 3DMode.ini in ShaderFixes folder!

4.1 Ingame Settings

- up to you (i think), the fix was made with MAXED out settings,if there are any issues, please provide your settings, try maxed out settings !

5.  Key Settings

5.1  Key Settings (Keyboard + Mouse Gameplay)

"NUM /"

-  cylce HUD-Depth

"NUM *"

-  switch between high and low convergence

5.2  Key Settings (Controller Gameplay)

"XB_GUIDE"

-  switch between high and low convergence

6.  Key Setting - Customization

----only for more advanced users---

If you don’t like the settings the fix comes with, you have to find your own likes:

- to watch your current convergence/separation set hunting=1 in \ShaderFixes\HuntingOptions.ini

- change constants/settings/keys and check the result in game by pressing F10

6.1  3Dmigoto - Constants

----only for more advanced users---

- the fix comes with the following default constant settings:

;HudDepth
x20=0.8

;CrosshairDepth
x21=1.0

;AutoDepthToggle
x22=1.0

;MenuIndicator
x23=0.0

;AimIndicator
x24=0.0

;InventoryMenuIndicator
x25=0.0

6.2  Advanced Key Config

----only for more advanced users---

You can define keys in [Constants] section with:

[KeyWHATEVERYOURNAMEIS]

Key = KEY 

CONSTANTX = XXX

SEPARATION = SEPXX

CONVERGENCE = CONVXX

- for choosing a key look here for replace KEY with it (http://msdn.microsoft.com/en-us/library/windows/desktop/dd375731(v=vs.85).aspx)

- replace CONSTANTX with the constants written above

- replace XXX with a value, see above

- replace SEPXX with a separation value, leave it = the separation you choose by STRG+F3/4, no changes, 100 = 100%

- replace CONVXX with a convergence value, leave it = the convergence you choose by STRG+F5/6, no changes

Key Press Types:

- type = hold ==> only active while holding this key

- type = toggle ==> enable/disable this setting

- type = cycle ==> cycles the settings via this key, e.g. SEPARATION = 100, 50 will cycle between 100% and 50% separation pressing this key

--if you have more settings you need to define it for every cycle step:

--means: if you want to change separation and you want to use the same constant for both settings use:

SEPARATION = X1, X2

CONSTANTX = XXX, XXX

- no definition = settings set on ON once pressed the key

You can also change any existing key definitions changing the key behind key = in the d3dx.ini .... if you like the setting but want another key for it.


Acknowledgements

- THANK you DSS for being on this earth :-)
- THANK you masterotaku for being on this earth :-)
- Big thanks to Bo3b, DarkStarSword, Flugan and all others involved in creating 3DMigoto; an amazing wrapper that allows us to fix our favorite DX11 games in 3D Vision!
- NVIDIA for creating 3D-Vision as a tech!