Thursday, November 10, 2022

UNREAL Engine 4 – Universal Fix 2 - V 9.12 - (Update 10.11.2022)

 UNREAL Engine 4 – Universal Fix 2


— Created and assembled by Losti —
 Made with and for the 3D-Vision Community 
— Version: 9.12 —





For continuous Geo11 Driver Support please join Dave Lockwood at Patreon:


For continuous updates and support please consider some contribution via PayPal to:

Or became a Patron:
 


Lets keep 3D-Vision alive all together! Please enjoy games using UE4-Engine with this fix!


Infos and download @ MTBS:

NOTE: Make SURE to READ this for getting the main changes in the fix related to AUTO Depth HUD/UI behavior in 9.00 and later:

https://www.mtbs3d.com/phpbb/viewtopic.php?p=184246#p184246


Change-Logs:

Complete Change-Logs - 1.00 to 9.02
https://losti.s3.amazonaws.com/ChangeLogs.txt

Change-Logs - 9.06 to 9.11

- update to geo11 v0.6.76
- more games should now work with GEO11, less crashes
- AutoConvergence improved, Option AutoConvergence OFFSET added for more fine tuning general depth in AC mode
- AutoConvergence config for geo11 adjusted to be 100% like in 3dmigoto
- several motion blur RegEx fixes
- new effefct toggle option added, that can be used to reduce blur and raise sharpening that also reduces convergence change related motion sickness
- simple game start via 0_Start3D.cmd if the game was confogured by 0000_Start_GEO11.cmd or 0000_Start_MIGOTO.cmd (default game start is MIGOTO)
- many scripts removed, only 0_Start3D.cmd and 0000_Start scripts left, doing the things you need to run a game
- only migoto launcher option left for crash prevention, the others not needed anymore. If you crash a game you can try some compatibility options for the starting exe instead
- more extended autoconvergence depth buffer for older games
- fixed an issue that depth buffer got lost in some games
- added restriction for resource copies for HUD shaders to save some performance
- epic overlay crashes fixed if you use a starting script
- RegEx for object flicker fix adjusted for GEO11, added autimatic MIGOTO / GEO11 detection
- several bugfixes for automatic game ini settings for fixing AA related things
- new RegEx for TAA fix
- mouse auto depth is now disabled by default, it can be enabled by setting x132 = 0 in ShaderFixes\AutoDepthUIHUD.ini
- additional RegEx for HALO fix
- CS Light Clipping for 427 games should be perfect now
- new AO fix mode added that can be used in hard cases to kill hard wrong AO effects but keep AO as good as it cen before completely disable this
- new motion efffect fix RegEx added for PS and CS fixing the missing things in some games
- green overlay messages removed
- added RegEx for FOG // only on demand its uncommented in the fix, not uiversal enough
- added RegEx for Multiple Effect Additions
- autoupdate removed, its up to you to update a game now again
- object and object reflection shaders now prepared and working for strange swizzle shifts, one RegEx removed not needed anymore
- AC shift key was moved to CTRL NUMPAD + to not interfear with shader hacking anymore
- added new RegEx horizon light fix
- added new RegEx dissortion fix
- mouse.hlsl updated for autodepth crosshair only mode that pushed mouse to static depth
- added RegEx for new danamic light fix
- added new special Decal RegEx fix
- added new Special reflection fix RegEx
- ShaderFixes folder cleanup from unneded files
- Install scripts (0000_Start_GEO11.cmd / 0000_Start_MIGOTO.cmd) will now let you choose the output mode
- some presistent dynamic light issues are now fixed, this was leading to not original dynamic light intensity in 90% of the games and to some real issues in 10 % of the games
- issues often not noticable was fixed for some special reflection false positive fixes are now ok


Change-Logs - 9.11 to 9.12

- geo11 version update to 0.6.78
- HOTFIXES an issue that leads to not working AutoConvergence nor Auto-Hud-Depth
- fixes an issue with darker or black right eye
- HOTFIX missing convergence adjustment keys



210 comments:

  1. Wow this is the closest I have seen yet of something like a how-to-fix guide for the layman. All the other bits and pieces I have seen don't quite jibe in my mind.

    ReplyDelete
    Replies
    1. Same here!! lol
      I would love to have/see/know a guide on how to make fixes...I don't have the time to go after all the learning process...but maybe do some fixes(after I know the way)...yeah!

      Delete
  2. I now see how some fixes are able to be produced so quickly.

    ReplyDelete
  3. And some aren't so easy (ex: Shadow Warrior 2...the Road Hog Engine?)

    ReplyDelete
    Replies
    1. I dont want to call it EASY to fix UE4 Engine Games. Shaderhackers have sepend a lot of time to find the all the corrections. The same like for any other game. If a game using an engine and once is fixed, its easier to fix other games based on this engine, thats true. But also UE4 once was unknown and fixing this the first time is comparable to any other game engine.

      Delete
    2. Sorry, I overstated 'easy.' With respect to Unreal Engine and this universal fix, a lot of the work is done up front. I think I might be able to use what you have here to actually make a fix. With other engines I would have NO idea where to start.

      Delete
  4. Man...I have no words for this...amazing work!!!!!!!!
    Can't thank you enough for this..Losti, and all the others that contributed before and/or still!!!!

    ReplyDelete
  5. Offtopic:

    I cant create an account on MTBS3D. I only see the login-button

    Any ideas what Iam overlook?

    ReplyDelete
    Replies
    1. Oh, i have helped myself. tipe in google "mtbs3d register "

      Delete
  6. amazing thanks losti for your wonderfull contribution to the 3D community

    ReplyDelete
  7. Reupload of Version 1.13 because of wrong SBS ini files. Please ReDownload if you have downloaded before 08.01.2020. If you dont use a stereo mode next to 3D-Vision, you dont need to redownload.

    ReplyDelete
  8. thanks but i've got a white screen that appears, dieseppears, during game ...strange

    ReplyDelete
    Replies
    1. An Universal fix is not a garant that everything is working 100% in every game.

      There are trouble shooting discriptions in the post above you may be able to solve some problems by your own.

      PS: "...during game" is not very usefull for checking the issue and try solve the problem....

      Delete
  9. Brilliant - Thank You!

    ReplyDelete
  10. I need some help for terminator. I've followed all instructions correctly. before I installed the fix the game would crash on start up as 3d started with fatal low level error. now the game starts I get the fix osd display then when the save icon appears (when 3d tries to activate) it crashes. tbh this first time I used my 3d shades and emitter in years but its all working correctly with dark souls 3 and halo. I have the 3d manager installed and it doesn't even list terminator so I cant even try an automatic fix. if anyone could she d any light on my 3d issue it be much appreciated.

    ReplyDelete
    Replies
    1. It would be cool if you post something like this in the Post from the game .-).

      3D-Fix-Manager will never solve those problems. The only thing the tool is dooing is the same thing you do manually. Copy the fix to the respective folder and run the game. Nothing else. So using 3DFM will not brting you any cure.

      Not even any game is simillar so it is game speciffic. DS3 and HALO are not UE4 games. Install a 3D fix will never cause crashes in general, i mean you cant do anything wrong while installing, except choosing a wrong directory but THAN the fix is not active. If the fix is active you have installed it corretly.

      I have added several hints here in the blog post before the donload section in the Trouble Shooting section. Please read the things below this entry (Crashes and Hangups - possible Options to cure) and let us know how you are dooing.

      Delete
    2. Terminator is not in the 3DFM list because there is no game-profile for it, which is typically made by PaulDusler for anything posted to the blog. Random unknown games are not going to be directly supported, unless he sees them. IIRC any game without a 3DFM profile won't show in the list on the left, but you can always add a New profile in lower left.

      For 3DFM, Losti is right that it won't perform any miracles. But it can help simplify things and solve problems that people often overlook when doing it manually. For example- it automatically sets that retarded Win10 option of "Disable full-screen optimizations". If you don't set that checkmark, you never get 3D now. Easy to overlook, hard to debug. Another example is setting games full screen. 3DFM will automatically set the launch parameters for UE4 and Unity games to force full screen, and also set game settings that can affect 3D automatically. Again, easy enough to setup manually, but easy to overlook and hard to debug because of silent failure.

      You can automate some of your testing of UE4 games using 3DFM. It will show all games installed on the left, even if they don't have fixes, but have profiles. And for an unknown game you can make New profile and lookup the game via SteamDB and specify UE4 as game engine. It will setup the profile to use DHR's UE4 Universal fix right now, but I'll update the link for future versions.

      For a given profile you create New, if you drop in Losti's updated UE4 Universal fix into the Tools\3Dmigoto\ subfolder of 3DFM, it can directly install the UE4 Universal fix for it using Install 3D Wrapper. Might save some time.

      Delete
  11. I have added some hints to the stereo flags in the trouble shooting options because i have at last 2 games having light/shadow issues that was fixed using stereo Flags 4008:

    You may need to change StereoFlagsDX10 to 4008 (d3dx.ini)
    If you have wrong effects with shadows and lights, the game may need another stereo flag. Open d3dx.ini and search for StereoFlagsDX10 = 0x00005008. Changes this to StereoFlagsDX10 = 0x00004008. Using StereoFlags 4008 will make the Outlines 2D. This can be fixed by the identification of the VertexShader and add some lines in the d3dx.ini. In this case please let me know that you want to learn how to do this. Start the game and see if the shadows have been corrected. If not, there is little hope and you have to live with it. You can still try to change the following line StereoTextureEnable = 0x00000023 to StereoTextureEnable = 0x00000027.

    ReplyDelete
  12. @Losti
    I am happy to say I have had some success with applying this to a game, Ruiner. I have the Epic Games version. There were only a few very minor changes I made by applying a few UE4 fix setting keys. I have only been through the first level and some of the next section, but so far, so good. The only somewhat obvious issue I saw was in the game over screen, where there are some enemies shown in red with bad convergence, behind a splash screen/canvas. Is it possible to trigger auto convergence for these scenes only? Also I am unaware where all of the auto fixing keys, OSD, etc. are to be disabled once I am satisfied that no more corrections are needed. I only have a 1080p monitor so I don't know how I could be sure other resolutions are OK either. Thanks for any suggestions...

    ReplyDelete
    Replies
    1. Its possible to trigger autoconvergence in dependency of the scene if this scene has some unique texture or shader activated. Buts this is nothing we dan do universal. Why dontyou simply use the auto convergence enable/disable key for the scene? If the apperiance for some enemies is only strange, there is a shader that is missed or you need another stereo texture enabled flag or StereoFlagsDX10, may be, may be not. May be its simply a shader you can disable that causes this.

      Howver, the OSD can be disabled by default setting ;helptext
      y20 = 1.0 to 0.0 in d3dx.ini

      Except the auto Depth HUD that is not suitible for post games beeing enabled permanentely, all the options you choose are saved, except the convergence preset you have choosen. Just set up your convergence with STRG+F5/F6 and than press STRG + F7 to save. If you switch on auto convergence and than switch it off, the last used convergence from auto convergence is set as currrent convergence. If you want to restore your prefered settings, you should make a key for this here. OR modify the depth preset rotation key. There is a section in the ini file:

      ;;;;;;;;;;;;;;;;;;;;;;;DEPTH Presets KEY;;;;;;;;;;;;;;;;;
      [Key_DepthPresets]
      key = *
      type = cycle
      convergence = 40.0, 60.0, 80.0, 100.0, 120.0, 140.0, 160.0, 180.0, 200.0, 220.0
      separation = 100.0, 100.0, 100.0, 100.0, 100.0, 90.0, 85.0, 80.0, 75.0, 70.0
      $convergence_preset = 40.0, 60.0, 80.0, 100.0, 120.0, 140.0, 160.0, 180.0, 200.0, 220.0
      $separation_preset = 100.0, 100.0, 100.0, 100.0, 100.0, 90.0, 85.0, 80.0, 75.0, 70.0
      ;;;;;;;;;;;;;;;;;;;;;;;DEPTH Presets KEY;;;;;;;;;;;;;;;;;


      Just replace this with that and enter your convergence for YOURCONVERGENCE

      ;;;;;;;;;;;;;;;;;;;;;;;DEPTH Presets KEY;;;;;;;;;;;;;;;;;
      [Key_DepthPresets]
      key = *
      convergence = YOURCONVERGENCE
      separation = 100.0
      ;;;;;;;;;;;;;;;;;;;;;;;DEPTH Presets KEY;;;;;;;;;;;;;;;;;

      Than you can set up your desired settings anytime even if auto convergence was on and is off now. Just press * to set your convergence you want to play normally.

      The rest of all settings you choose via the keys you can see in the OSD are saved by pressing F10 OR by exiting the game and restart it.

      If you really want to have auto Depth for the hud permanentely on, set ;AutoDepthToggle
      x22=0.0 to 1.0 in the d3dx.ini

      Delete
    2. Please test this version, i have adapted the things for this game:

      https://helixmod.blogspot.com/2020/01/ruiner.html

      Played the first level and reached the second one without any troubles.

      Delete
    3. This game and a few others Ive tried, wont boot after applying the universal fix. it just sits there on the splash screen. Any ideas losti? This is even with your official ruiner fix

      Delete
    4. Bis long did you wait in the splash screen? You can uncomment the include of the Reg ex in the ini and see if the game Starts. Yes, than you just need to wait a Bit more at the splash screen. Its System dependend how long a fist Start will last until shaders are cashed. Wait up to 5 mins. Ist only for the first Start. If the game will not Start after uncoment the regex fix its your system thats bad. What are your specs?

      Delete
    5. If you are not able to give me any reply I can't help you!! Even if the suggested things will work it would be cool if you can give me a feedback on this!!!

      Delete
  13. Sorry for the late reply Losti, been very busy. Waited for well over 5 mins at splash screen and uncommented regex to no avail. still not booting. Running Win10 1809 with lastest drivers and workaround done with 3dfixmanager. Running a 2060RTX card

    ReplyDelete
    Replies
    1. Than this is a problem of your system at all. Please try DDU and a clean installation of 425.31 amd try again. If this is working you can try the driver Update again.

      Delete
    2. Sorry Losti, Just tried it again tonight and waited a bit longer than 5 mins and it booted. Very sorry, I hadnt noticed having to do this before on other games. Cheers and thanks so much for your support.

      Delete
  14. Hi! Thank you for such a great effort! Unluckily I have tried to download the files, but I get a XML file saying "unauthorized". Is there something I may do to get them? Thanx for your kind support

    ReplyDelete
    Replies
    1. Looks like the files are in the process of updating from 1.151 to 1.152 and the new files have not uploaded yet. Wait a day for Losti to finalize his upload.

      Delete
    2. Thank you for your answer. Kind regards.

      Delete
    3. Sorry for that. Due to the storm im germany i have had to fix my LTE antenna right before i want to upload the new Version and than it seems i forgot about "facepalm" Ill upload the files in approx 1 hr.

      Delete
    4. Good deal, thank you Losti.

      Of note- don't worry about deleting old files, you can just leave them there. Disk storage costs us nothing, it's only bandwidth that costs. If you leave the old ones in place, people can always find an old URL. And sometimes the old fixes have interesting things to be learned. No worries either way, just noting that deleting old files is not necessary.

      Delete
  15. How do I know if a game is compatible with this fix or not?

    ReplyDelete
    Replies
    1. This fix should work more or less for all games using the Unreal 4 engine. What you may have to or can do if you have issues is discriped in the textwall above.

      You cannot use this universal fix for games based on another game Engine.

      Delete
  16. Hi every body for me this fix is working absolutely fine except in the dark picture man of medan i see small boxes around light and they go away as i stay in game and while moving i see a lot of them around lights.
    How can i fix it??
    Thanks

    ReplyDelete
    Replies
    1. Version 1.15 has improvements for the clipping you mention. But you cant use the Universal fix out of the box for Update the Dark picture game, because i have had made some chamges special for Dark pictures. I will update the gamefix this evening. Than you can try and look if the clipping is gone or not. If not, i really appreciate to have a savegame to check this issue. Ill give a Note in the Dark pictures game fix Post if its done.

      Delete
  17. Dear losti u have always been a great help.
    Also dear how can i use reversed top and bottom 3d mode as this game does not show in 3d fix manager.

    ReplyDelete
    Replies
    1. - Open the d3dx.ini
      - scoll down a bit and you will find this line ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;3D-Mode;;;;;;;;;;;;;;;;;;;;;
      - in this section you can read this: ;include = ShaderFixes\3dvision2sbs.ini
      - remove the ; before the include and save the file
      - as you can read here, you can now swith the 3D mode ingame with F12 or:
      - enter the ShaderFixes folder
      - open 3dvision2sbs.ini here
      - in line 10 you can se this line: global persist $mode = 0
      - as you can see above in this file: 5 = Reversed Top and Bottom
      - so change persist $mode = 0 to persist $mode = 5
      - save the game and start the game.

      Delete
  18. Ive to wear my glasses upside down due to sbs mode.

    ReplyDelete
    Replies
    1. You can cycle through different versions of the SBS mode. Look for the section in d3dx.ini or the SBS.ini that shows the different types. Usually mode=3 is reversed SBS. And usually you can cycle with F11 key.

      Delete
    2. For UE4-UV2 its F12 because F11 usually changes resolution in UE4.

      Delete
  19. Ooh thanks dear for guidance and also that issue previously discussed is gone.ive face same issue with layers of fear 2 also but today after changing picture mode in oled from football to game remove those small boxes around bulb lights in game.

    ReplyDelete
  20. silly question, how do I know if the game is compatible with this fix? Is there a way to know the game exact engine and if should work with this fix?

    ReplyDelete
    Replies
    1. Why not just try it? No one has the time to keep track of all the versions and variants. Best just to experiment.

      Delete
    2. FIRST: You can ask google to for "gamename game engine" for example ... but some search will not give you the game engine the game uses. Make some deepter search.... SECOND: Purchease the game and try! Games will always having the folder structure descriped in the section above "Instructions to install the fix" if they have UE4 engine. NOTE: THIS is not a garanty that the universal fix will work well!!!

      Delete
  21. Hi guys, I've tried Planet Alpha, Hellblade, Close to the Sun, none of them works, aren't those suppose to be UE4?
    I've copied the files to the shipping file folder, and changed the "width, width, hight" in d3dx.ini
    I'm using the latest drivers from Nvidia with Losti 3DV fix

    ReplyDelete
    Replies
    1. First of all, I would like to inform you that messages like "none of the things are working / nothing works / it’s not working" are useless for you and for us. This could mean, for example: your PC is on fire, the game is crashing, the game in 3D is completely broken or only a few effects are not corrected, the game is not starting the game crashing ... WHATEVER!!! To help you we need a detailed description of the problem. Not just a: "ITS NOT WORKING" message.

      HELLBLADE is not working with any universal fix around, its fix was a great work from HELIFAX, DSS and Bo3B. The fix was never being published @ this blog but you can get it here:

      http://3dsurroundgaming.com/3DVision/Hellblade_3DVision_Fix.rar

      Planet Alpha is working perfect until V 1.16 of this fix, except some SUD/LIGHT errors, I have added some sun/light fix in UE4-UF2 V1.17 today, please use STRG+NUMPAD2 to enable this for this game. Its NEW and only working since UE4-UF2 V1.17!!!!

      Close to the Sun is even perfect since V 1.16.

      You may have a general problem! Start 00_UE4-UniversalFix-2_Config.cmd to check if the you installed it the right way. This tool is available since V 1.16!

      Read the section how to install the fix and also read Troubleshooting Section. LEARN to LEARN ^^

      CHEERS!!!

      Delete
  22. I get the message when I try the 3 games I mentioned in the comment just before this one
    ---------------------------
    The UE4-PLANETALPHA Game has crashed and will close
    ---------------------------
    LowLevelFatalError [File:D:\Build\++UE4+Release-4.19+Compile\Sync\Engine\Source\Runtime\Windows\D3D11RHI\Private\D3D11Util.cpp] [Line: 182]
    Unreal Engine is exiting due to D3D device being lost. (Error: 0x887A0005 - 'REMOVED')

    ReplyDelete
    Replies
    1. This is the error that you get when using newer drivers. Either use 425.31 which always works, or go to the mtbs3d.com forums and understand the Schwing hack, which binary edits the video driver to avoid these UE4 crashes on latest drivers.

      Delete
  23. Unfortunately I can't use older driver 425.31 with Super card, and it will be same issue will all coming video cards that will not be able to use older driver than the release date. I will see if I can understand the Schwing hack :(
    Thanks

    ReplyDelete
    Replies
    1. Try this: https://www.mtbs3d.com/phpbb/viewtopic.php?f=105&t=23752

      Everything is included her what you need, a one klick and GO toll by Robert256. Please uninstall everything using DDU, than use this tool, it should do its work!!! Please let us know about the resuls and let some BIG THANK YOU in the post above!!!

      Delete
    2. Ok will try this now and let you know, Thanks big time

      Delete
  24. Maybe Losti can make driver 425.31 work with Super cards and all coming cards!! :D

    ReplyDelete
    Replies
    1. Try this: https://www.mtbs3d.com/phpbb/viewtopic.php?f=105&t=23752

      Everything is included her what you need, a one klick and GO toll by Robert256. Please uninstall everything using DDU, than use this tool, it should do its work!!! Please let us know about the resuls and let some BIG THANK YOU in the post above!!!

      Delete
    2. Losti with respect to everyone in the 3DV community, you're the KING of them all
      I was suffering with my Super card playing lot of 3D games, now I tried the link above installing the drivers with this patch and everything is working now :D
      Regarding UE4 fix I tried it with 3 games and it works too.
      OMG everything is working, 3DV is back to live yessssss
      BTW, just small matter not big deal, the Antivirus keeps putting the file into Quarantine as a virus, but after adding to exception everything went well.

      Thank you BIG time, wish I can hug you lol and thanks to everyone in this community

      Delete
    3. There is also a hint for this one at the Blog Post:-) "This tool is based on MS batch instructions and do not use any external program but it changes files! So make sure your AntiVirus will not block this" :-)

      Have Fun!!!!

      Delete
  25. Working great with, for example, terminator :-) Thanks a lot Losti ...driver 445.75, Robert256 tip ;-) … But for Gravel, the menu is OK, but when I start a race, screen becomes white ??? As anybody an idea ? I've tried different configuration and the Losti tool ...Thanks a lot ;-)

    ReplyDelete
    Replies
    1. http://helixmod.blogspot.com/2020/04/gravel.html

      Delete
  26. REUPLOAD with new things added to 1.17 today, please REDOWNLOAD!!!

    ReplyDelete
    Replies
    1. Done, Thanks Losti for this great fix, it's working perfectly with the games I've tried until now

      Delete
    2. The F1 menu which comes with the fix, I can't get it with some games such as Sherlock Holmes Crimes and Punishments, but it works with other games. Is there a way to get that menu other than F1?

      Delete
    3. Why F1 is not working? Im which way it is not working? You can Change every key by edit the d3dx.ini...search for F1 and replace the entry for every key you want. Hints für key are written in the ini. There is a link for the Virtual key code dokumentation.

      Delete
    4. Maybe because F1 is bind to another function in Sherlock Holmes Crimes and Punishments, by the way the game is free now in Epic if you want to try it.
      I will change it in .ini
      Thanks

      Delete
    5. Ok even changing the F1 in d3dx.ini doesn't work, it's not big deal, I'm just sharing with you some experiences with the fix.
      Actually the OSD doesn't appear at all at the beginning of the game.

      Delete
    6. Hm...ill have a look. I dont want that this is my fault:-) have you started the config tool without getting an error??

      Delete
    7. WOOW, this Sherlock game is the VERY FIRST ONE I see that is NOT Win64 !!!! Its Win 32 and needs the 32 bit migoto files. Any other game you have you dont see the OSD? NO OST means MIGOTO is not active! You can also see this if the left lower screen green screen message will not tell you anything something like this: D-Vision-Fix - 1.17 by Losti .....

      I have seen that we need another halo fix and Stereo flags may be.... BUT ITS COOL FIXED without any migoto fix, but let me see if i can handle this quickly. Its a good thing to improve the universal fix AND the config tool may be. I need to considder check the 32 bit thing and implement it in the config tool, because this is only checking this:

      if NOT exist Win64 set ERRORMESSAGE=You installed the fix into the wrong folder. The right install folder is: ...^\GAMEFOLDER^\XXX^\Binaries^\Win64^\
      if NOT exist Win64 set ERRORMESSAGE2= OR: ...^\GAMEFOLDER^\Binaries^\Win64^\
      if NOT exist Win64 (

      Ill working on this!

      Please ALL continue report any game having bigger issues, id like to keep the UE4 fix up to date as a contribution for the comunity.

      Delete
    8. As for now this is the only game I don't see the OSD, but I will keep you updated with games list.
      Thanks for keeping this fix alive and working :)
      I'll sign my posts with KasperKyd for you to know :)
      Cheers

      Delete
    9. Losti, I'm sorry to confuse you here, it seems the Sherlock Holmes: Crimes & Punishments working on UE3 that's why you see Win32, I found that when I tried Alice Madness Returns, it's pretty old game with Win32, so when I checked I found they use Win32
      KasperKyd

      Delete
    10. OK i have checked the game Sherlock Holmes Crimes and Punishments. As it seems this game needs a complete individual fix. SORRY ! Not working with universal fix at all. This game only applies some Halo RegEx, nothing more, and they wher wrong. Ill NOT fix this, its too time consuming. But as i say, its really good in shape WITHOUT any fix.

      This is an update that is working with 64 and 32 bit games to start the config tool, enables you to hunt shaders with this tool.

      https://losti.s3.amazonaws.com/UNREAL_Engine_4_UNIVERSAL-FIX_2_V1.17_32BITUPDATE.zip

      I have noticed that the additional halo fix will make some things more cool but the game is still not fixed. You can use this update for HUNT shaders and disable it, for nothing more. Its not better than the game without any fix. Thats all i can doo for you here, sorry!!

      CHEERS!!

      Delete
    11. Thank you big time Losti, at least we have your fix working with 32 and 64 now.
      This fix is getting better and better.
      Cheers
      KasperKyd

      Delete
    12. But please note that 32 Bit games may me ue3 Engine and tue fix is not working at all. And you need to start the config tool once to apply 32 bit migoto Files.

      Delete
    13. Wow that's for the hint, I was wondering why didn't work. Now I ran config once, and I got the OSD
      Thanks again Losti
      KasperKyd

      Delete
    14. For UE3 games, we also have a Universal Fix for them, but you need to grab it from a working game that is using it. I'm not sure what best game to use would be, but look for the fix with a PSscript.lua and VSscript.lua. Those are the original Helix fixes that are universal for any UE3 game.

      Delete
    15. But its not DX9, this sherlok game Bob.

      Delete
    16. Ah, strange one. DX11 but UE3, very rare. I tested this briefly, if you add "-dx9" as launch parameters it will run in DX9 mode. 3D turns on, but there image is only 2D, so would require more experiments.

      Delete
    17. Thanks bo3b and Losti for discussing this loud so we note information :)
      Cheers
      KasperKyd

      Delete
    18. I have made a new fix for this game, its at the blog. Only in case you didnt have noticed. please uninstall the UE4-UF2 fix completely fort he sherlock game. Its not compatible!

      Delete
    19. Hi Losti. The link for the 32-bit version no longer works.

      Delete
    20. Because the fix was not working for the game i have found having 32-bit i have made a separate fix. What game do you have that have 32 bit? Id like to check.

      Delete
  27. I tried to install the latest 3d vision driver 425.31, but following error message occurs:

    "NVIDIA Installer cannot continue
    This NVIDIA graphics driver is not compatible with this version of Windows.
    This graphics driver could not find compatible graphics hardware"

    Laptop is new (Lenovo Legion y540, rtx 2060, win10) and connected to a ROG PG278Q monitor. Any ideas how to let this driver work? I appreciate every idea to solve this problem.

    Thanks for help.

    ReplyDelete
    Replies
    1. This is really not the place to ask about driver problems. This is the thread for the UE4 Universal Fix. Go to the mtbs3d.com forums or the 3D Vision Discord and you will find what you seek.

      Delete
  28. HELP.I want to test upscaling,but when i uncomment [include = ShaderFixes\upscale.ini],and set upscaling = 1,width=1280,height=720,upscale_mode = 1,but i cannt see anything,only some blur flash point.Do I missing something?

    ReplyDelete
    Replies
    1. This thread is for UE4 Universal Fix, upscaling has nothing to do with the Universal Fix.

      Go to mtbs3d.com, or the Discord for questions like this.

      Delete
    2. Actually i want to built 3d vision surround system with 3 monitors for ue4 game,so i just follow the install instruction and config game resolution 5760x1080,dont need to care about upscaling stuff,is it right?

      Delete
  29. thanks for your great fix but i try sbs and it didt work pls help

    ReplyDelete
    Replies
    1. Sorry to be snippy, but if you guys can't be bothered to give us any details about what you are trying to do, we can't be bothered to try to help.

      Delete
  30. Thanks Losti, Gravel now working fine ;-)

    ReplyDelete
  31. Thank you guys for keep updating this fix, it's one of greatest fixes, work with lot of games perfectly.
    KasperKyd

    ReplyDelete
  32. Big Thanks! for this big work, actually I'm trying to make it work with Darksiders Genesis but failed. Can anyone help please?

    - I installed the fix from 3D Fix Manager that extracted the files in ProjectMayhem/.../Win64 folder
    - edited d3dx.ini and set my resolution
    - copied Scalabilty and add contents of Engine_additions then make readonly for both files
    - Started the game from normal game .exe, started the game via 3D fix manager, started the game using 00_UE4-UniversalFix-2_Config.cmd, 3DMigoto too, force full screen..
    All starting methods ends up with a crash after blackscreen launch

    LoginId:0ca81cb7414db1ee566d1eb28773118e
    EpicAccountId:

    Assertion failed: [File:Unknown] [Line: 198] Unreal Engine is exiting due to D3D device being lost. (Error: 0x887A0005 - 'REMOVED')

    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    DarksidersGenesis_Win64_Shipping
    kernel32
    ntdll

    Config: 441.41 Driver, LG TV with Acer 3D profile and EyeSwapper

    ReplyDelete
    Replies
    1. That error happens in any UE4 game when the driver is not hacked to allow it. You can't use most recent drivers with 3D Vision unless you use the Schwing hack. Best bet for these is to just use 425.31 where everything works. Latest drivers include literally nothing you need, even for just released games like HL:Alyx.

      Delete
    2. I don't know if I understand you well but with this driver I'm able to play any other game with proper fix, I installed 3D driver with 3D Fix Manager software (I uninstall/install it many times until it was shown in nvidia control panel) The issue now is that only Universal UE4 fix that it's not working
      Thank you anyway

      Delete
    3. Can you share Schwing Hack please? I didn't find it I only found Robert256 solution:
      https://www.mtbs3d.com/phpbb/viewtopic.php?f=105&t=23752&sid=32e3c644e1afbf2bf7c4ce13b63fdbc7&fbclid=IwAR1VFIqae82YC0RPFW6G5Rrq4xmdf95KCKlmhHE6at55BRYVJjqydOxAKkA

      Delete
    4. You are wrong SApro. Its like bo3b tells you AND the most afflicted game engine is UE4.... The games that are working for you might are not UE4 games. I assume you have windows 10 GREATER than 1809 and using the latest driver installed via 3DFM but NOT APPLY Swing hack. Follow the robert method should bring you to a working system with latest driver BUT USE DDU and start from a clean system as recommented.

      If this is not working use DDU again and use the driver Bo3B tells you.

      Delete
    5. The Robert256 is built around the Schwing hack. You are still better off to just run 425.31. Far fewer problems to solve, no EAC conflicts, or missing signed drivers issues.

      Delete
    6. Thank you guys everything is working with 425.31 driver :))

      Delete
  33. This is awesome... Just tried it on a small indie game and it worked perfectly.

    However there's only a minor problem: the AUTO Depth Middle HUD function won't stick.

    I've set all the values to 10% so it only affects the crosshair, those 10% values would be saved, I don't have to adjust them every time, just need to turn the feature ON. AUTO Convergence option on the other hand would stick, means if I turn it ON it would be ON automatically when the game launches.

    I've tried to turn AUTO Depth Middle HUD function ON then hit F10 to save settings, but a few seconds after I hit F10, the function would be switched OFF automatically.

    ReplyDelete
    Replies
    1. The F10 key is used to reload all the 3Dmigoto settings. Can you change that in the game to be some other key? If not, edit the d3dx.ini and find the F10 key and change it or remove it there.

      Delete
    2. Hi, F10 will also save the global constants. Thats right. BUT: Save AutoDepthHUD is intentionally not integrated. If you want to have AutoDepthHUD permanentely enabled, set ;AutoDepthToggle
      x22=0.0 in the d3dx.ini to 1.0

      Delete
    3. Thanks for the reply, setting x22=1.0 in d3dx.ini did the trick.

      While this feature works very nicely to put the crosshair in correct depth, it does interfere with other UI elements. So I went through a few tutorial and quickly enough I was able to identify the texture for crosshair and make the auto depth apply to it only without rely on the "screen start" values.

      Here're the changes I made:
      ----------
      (d3dx.ini , I removed everything other than AutoDepthHUD-2)

      [ResourceDBScaler]

      [ShaderOverride_AutoDepthHUD-2]
      Hash=da86a094e768f000
      vs-t110 = Resource\ShaderFixes\auto_convergence.ini\DepthBuffer
      vs-cb13 = Resource\ShaderFixes\auto_convergence.ini\_gGlobalParam
      ;set disable_scissor = 1 if your health or stamina or whatever bars are not moving, NOTE: HUD should be near screen depth than to avoid clipping!
      disable_scissor = 1
      ;analyse_options = dump_tex mono stereo dds
      x2=ps-t0
      checktextureoverride = ps-t0

      [TextureOverride_Crosshair]
      hash=6cd7420f
      filter_index=2

      ----------
      (da86a094e768f000-vs_replace.txt , basically I replaced all the screen start checking with filter index checking)

      if(AutoDepthSwith.x==1.0)
      {
      // CrossHair at depth
      if(tex_filter.x==2.0)
      {
      o0.x+=adjust_from_depth_buffer(0,0,5000*1)*o0.w;
      }
      else
      {
      o0.x+=stereo.x*HudDepth.x;
      }
      }
      ----------

      This works and I can toggle 3D crosshair with [Num-] (the Autodepth toggle) ,however I've then got another problem: some elements are still rendered at different depth while Autodepth HUD is turned ON vs OFF. What else do I need to change? Basically I want Autodepth work on this texture only and do nothing else.

      Delete
    4. Never mind... it turns out that for some reason the developer decides to use the same texture for EVERYTHING that looks like an rectangle: the semi-transparent crosshair, the menu background, the sliders in options, etc.

      So I had to rely on the screen start checking to only apply the depth to this texture at the center of the screen.
      I had to manually disable the mouse cursor problem though, the information on this page is some what outdated (no result for that string anymore) but it's basically the same as AutoDepthHUD shader overrides so I just removed the portion checking for AutoDepth enabled.

      Delete
    5. Nice to know that some one has used my tutorial and got the things working. If you need the switch on and of for the crosshair but the rest of the HUD @ static depth:

      1.
      - Disable the AutoDepth HUD with the "-" key as used to, this makes HUD static, as well as the crosshair.
      - For crosshair depth toggle you have to change the respective shader file that draws the crosshair, in your case you mentiones: da86a094e768f000-vs_replace.txt
      - open it
      - you can leave the "screen start" values as they are. The original file says this:

      //if(tex_filter.x==2.0)
      //{
      if(AutoDepthSwith.x==1.0)
      {
      if(LeftHUD_X_ScreenDepth.x == 1.0)
      {
      LeftHUD_X_ScreenDepth.x = LeftHUD_X_ScreenDepth.x*1.1;
      }
      if(RightHUD_X_ScreenDepth.x == 1.0)
      {
      RightHUD_X_ScreenDepth.x = RightHUD_X_ScreenDepth.x*1.1;
      }
      if(UpperHUD_Y_ScreenDepth.x == 1.0)
      {
      UpperHUD_Y_ScreenDepth.x = UpperHUD_Y_ScreenDepth.x*1.1;
      }
      if(LowerHUD_Y_ScreenDepth.x == 1.0)
      {
      LowerHUD_Y_ScreenDepth.x = LowerHUD_Y_ScreenDepth.x*1.1;
      }
      if(o0.y > -LowerHUD_Y_ScreenDepth.x && o0.y < UpperHUD_Y_ScreenDepth.x && o0.x > -LeftHUD_X_ScreenDepth.x && o0.x < RightHUD_X_ScreenDepth.x)
      {
      o0.x+=adjust_from_depth_buffer(0,0,5000*1)*o0.w;
      }
      else
      {
      o0.x+=stereo.x*HudDepth.x;
      }
      }
      //}

      Just remove the // at the first, second and the last line. This makes auto depth for crosshair only for your texture defined.

      - now change the constant number for the AutoDepthSwith. The line is written in the file some lines above.
      => float4 AutoDepthSwith = IniParams.Load(int2(22,0));
      change it to float4 AutoDepthSwith = IniParams.Load(int2(90,0));

      Now define a NEW key similar to the key for the auto depth on of thing in the d3dx.ini but take x90 and not x22 here.

      You can remove the AutDepthSwitch by remove if(AutoDepthSwith.x==1.0)
      { and a } before the last else in the shader file.

      You can also use the config tool. save your modded shader HUD shader and the d3dx.ini. Turn off AutoDepthHUD by pressing key 4 in the main menu. Copy back your saved d3dx.ini and your hud shader you have changed. The config tool will tell you AUTO-Depth-HUD/UI Option is enabled, because its checking the vs-t110 and vs-cb13 lines for comment out or uncommented. So jsut ignore this.

      OK Do you need any further help here?

      Delete
  34. I a plan to make a game prototype in Unreal Engine, will it work with this universal fix ?

    ReplyDelete
    Replies
    1. Typo: If I plan to make a game in Unreal Engine, will it work out of the box in stereo 3D with this Universal fix ? Or do I have to do more work in the game to make it 3D Vision compatible ? Thank you !

      Delete
    2. Sorry i cannot answer the question.

      Delete
    3. I guess I could try a test project in Unreal Engine and apply the fix on it, see if it works.

      Delete
    4. I created a dummy game in Unreal Engine.
      I added the exe file of the dummy game to 3DFixManager.
      I created a profile for it in 3DFixManager.
      Installed the Unreal Engine fix through 3DFixmanager.
      The green message appears, increasing depth and convergence works.
      But it only shows one 2D image. F11 does not cycle through stereo modes.
      So it seems to work half way through. Shortcuts work but there is only one image.
      Any hints what could be done to see two stereo images instead of only one 2D image ?

      Delete
  35. Updated to Version 2.10, for changes read the changelogs @ the beginning of the fix-post.

    ReplyDelete
  36. This comment has been removed by the author.

    ReplyDelete
  37. This comment has been removed by the author.

    ReplyDelete
  38. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. Can you please contact me @ discord? Whats the exact name of the game ?

      Delete
    2. This comment has been removed by the author.

      Delete
    3. the name of the game is "Tera" but it just had a dx11 release yesterday..

      Delete
    4. Can you give me a steam Link to the game ? Am am losti at discord. May i send you my current 2.2 so you can check if this is fixed so i dont need TP her the game. You can also send me an email.

      Delete
  39. Sounds like a thing i have to watch in detail. As far as i can remember there was a double catch for the new dyn light reg ex that i fixed in the not released 2.2. I can tell you later about this and may release a Hotfix.

    ReplyDelete
  40. This comment has been removed by the author.

    ReplyDelete
  41. Hi Losti, I'm trying to play Remnant, but everytime I try to open the game I get Unhandled exception.
    I've tried all 4 options in Config tool, neither is working.
    Even if I try to remove the fix, I get the same message as long as 3D Vision is enabled. Once I go back to 2D, game is working no error!! Any hint?
    Thanks, KasperKyd

    ReplyDelete
    Replies
    1. Something with your driver setup is not cool. Uninstall it and follow the instructions at MTBS from the bring back 3D vision Thread.

      Delete
  42. Losti can you please add a key to disable "right mouse click" making lower depth? I understand it's really useful for fist person games when using ironshights and some other cases, but in third person games it doesn't make much sense, I've looked around the menu on F1 but I don't see a key that does this, if it already exists please can you share it?

    ReplyDelete
    Replies
    1. For update 2.2 it is indeed 0% convergence reduce by default. Not 40% like now. I assume you do not have startetd the config tool yet? Since 2.0 there is an Option in the Quick Start menu to choose your desired conv reduce, also 0 % means disable is a Choice there.

      Delete
    2. I am trying what you are saying "convergence reduce to 0" it is not helping. We turn Auto Convergence completely "off". Then we adjust convergence to what we want manually. Now what is happening, is when you press the right mouse button, it is causing a shift in depth or convergence, this is really, really painful. It seems this is made for first person shooting games. We are playing isometric (diablo 3 type) games. How or why is this on by default and we can't shut it off? We do not want any convergence change when we hit Right Mouse BUtton!!! THank you Losti! How can we fix this?

      Delete
    3. As i told you. Use the config tool and set convergence for aiming keys to 0....

      Delete
    4. I've read the whole page here and don't see how to start the config tool. Is it installed along with the fix? I don't see any configtool type .exe in the installation folder. Where is it or how do you start the config tool?

      Delete
    5. My Friend, its written in the blog post at the section starting Options in red lettets...its a cmd file not exe.

      Delete
  43. Get crashes to desktop using this tool trying to play Tell me why

    But, I still love your work :D

    ReplyDelete
    Replies
    1. Please give more Details about your System, windows build, driver....

      Delete
    2. Also- if you are not using the Schwing hack and are running a driver newer than 425.31, every UE4 game will crash in 3D.

      Delete
  44. OK I am stuck I read the getting started section quoted here: "THIS FIX is ONLY for games using UNREAL ENGINE 4!!! Check GOOGLE to get INFO about the game engine your desired game is running on!!!
    DOWNLOAD the UNIVERSAL-FIX 2.0 (please see section DOWNLOAD here in this post)
    EXTRACT it it to the RIGHT folder: …\GAMEDIRECTORY\XXXXXXX\Binaries\Win64\
    START: "00_UE4-UniversalFix-2_Config.cmd" and WAIT until you can see the main screen QUICK-START menu
    The Config-Tool will install/update some things that are necessary for a perfect fix! FOLLOW IT if you will get some messages!""

    I double checked and the game I am trying to get working is Ark Evolved it is definetely UE4 Engine but Google stated it is heaviliy modded..

    I Downloaded v3.00 of the fix and installed it in the correct directory found here: C:\Program Files (x86)\Steam\steamapps\common\ARK\ShooterGame\Binaries..

    Now when I run the "00_UE4-UniversalFix-2_Config.cmd" it starts to load something but then I get an error message as follows: \Steam\steamapps\common\ARK\ShooterGame"" was unexpected at this time.
    Not enough memory resources are available to process this command.

    C:\Program Files (x86)\Steam\steamapps\common\ARK\ShooterGame\Binaries\Win64>


    I looked through the FAQ and all I did not see what to do about this config tool not running?? IF I missed something I am truly sorry.. Other then not getting the config tool to run the game looks perfect except the sky is Black?? this is a very good tool.

    ReplyDelete
    Replies
    1. Be sure to put Ver 3.00 fix in:

      C:\Program Files (x86)\Steam\steamapps\common\ARK\ShooterGame\Binaries\Win64 directory

      not in:

      C:\Program Files (x86)\Steam\steamapps\common\ARK\ShooterGame\Binaries directory

      For "sky is Black??" I don't know, but you can fiddle with Startup Menu options, or in-game options to tweak. I don't have the game.

      **Losti, I just tested again, V3.00 WILL work for games with "C:\Program Files (x86)" Ver2.10 Will Not.

      Delete
    2. v3.0 is in the correct spot?? I put the location in my above post..

      Delete
    3. Ah and in the case LG the sky is back you may try LCTRL NUMPAD 0 And see if this help.

      Delete
  45. Sometimes you may need starting the Tool a second one. If you still need TP Start the tool a second one. If this is still not working i will give you some Infos later in the evening to day.

    ReplyDelete
  46. ok I will try it again, I just thought maybe I did something wrong thank you Losti :)

    ReplyDelete
    Replies
    1. The spot seems ok where ypu placed it. In any other case the config tool would tell you that its not ok right after Start. But i dont assume that this solves the black sky

      Delete
  47. well turns out there might have been a install issue with the game.. I reinstalled and now the sky is normal just not in 3D.. I seen the fixed shader for it but I am unsure what I would need to change to get the sky fixed..

    So far the fix is working but I believe since it is a heavily modded UE4 there are gonna be a few setbacks but all in all it looks really good..

    ReplyDelete
    Replies
    1. The sky fix is broken in 3.0 and 2.1. I have fixed it and will Update the fix to 3.1 in the near future adding some things i figured out too. I can check the game this week. What UE4 Engine is the tool?Or didnt you get the config tool running now? If not in the first place you should do the aa/ao things manually often this can cause issue if not applyed. Just go to the config folder of the game ans copy scalability.ini from the fix folder there. Than add the things from the eninge_additions.ini to the eninge.ini in the same config folder. Write protect both files there. But only in case the config tool is still not working. You can also try to install the game not in the x86 folder and try config tool again.

      Delete
    2. OK I did as you asked the config tool still did not start, I get the not enough memory resources error still altho it did seem to take a little longer to produce the error like it was trying to run the tool.

      Delete
    3. Do you have moved the installation out of the Program Files (x86) ????
      I dont know the problem here!
      But you really dont NEED the config tool.

      There is a Engine_additions.txt in the universal fix, and so also in the folder you place it.
      As well as Scalability.ini

      Identify the config folder your game is using. Often you can find it via google. Seems the config folder is in the game itselfe: .../GAMEINSTALLFOLDER/ShooterGame/Saved/Config/WindowsServer/ ??????
      add Scalability.ini here, if exist, overwrite. open Engine.ini if exist there and add the things from the Engine_additions.txt at the bottom. Save both files, add write protection to it. Than you have ALL things you have had done automatically if config tool would have been running correctely.

      only thingis to change

      StereoFlagsDX10 = 0x00005008
      StereoTextureEnable = 0x00000023

      to

      StereoFlagsDX10 = 0x00004008
      StereoTextureEnable = 0x00000023

      or

      StereoFlagsDX10 = 0x00005008
      StereoTextureEnable = 0x00000027

      or

      StereoFlagsDX10 = 0x00004008
      StereoTextureEnable = 0x00000027

      if thiswill not work, you need a shader hacker ^^

      Delete
  48. This comment has been removed by the author.

    ReplyDelete
  49. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. Well I applied the fix with the ini files and it did fix the ghosting image thing.. I also will wait for 3.1 of Universal fix to get the sky fixed, I just thought the config tool was going to fix that..

      Believe it or not I am a shader hacker just not known too much.. I have a couple fixes on the boards..

      Delete
  50. Sorry cannot remember all members hehe. So please get the state of decay 2 fix. Open the ...C44.ini get the stars shaders reg Ex from there (1 or 2 im not sure) they are called starsfix. Replace with the one in the ...C44.ini from your ark Shader fixes folder.

    ReplyDelete
  51. Yes there has been many shaderhackers over the years.. Thnx for the tip on the stars.. I do have 2 issues and maybe you know about them or maybe they are Are specific.. 1 is there is a halo effect looking at objects with the water in the backround.. also there is a wierd double image sometimes when I mostly look down in Ark..

    I tried messing with all the option settings ingame but none of them had any effect.. I am wondering is this related to the TAA fix?? IF so the number that was set can it be changed to make the transition smoother?

    ReplyDelete
    Replies
    1. What taa fix? If you find a Shader in CS called taa...its not active since 3.0 im not sure about the PS. It hab also be object shaders that are not applyed because LG Skip reg ex. In 3.1 I will turn it on and make a toggle key. Best way to find out if your Problem os related to a Shader fix is to hunt in original mode. If there is a Shader which Switches the Effekt to ok, its a false pos fix. If this Shader for the effect is called skipobject its false skipped. You can try to remove the skipobject regex 1 and 3.
      Ill have a look at this game today. Was a bit buissi yesterday.

      Delete
  52. the taa fix was in the scalibility.ini this right here: r.TemporalAACurrentFrameWeight=.0 ;helps preventing TAA ghosting, faster visual responsiveness....

    when I am lookin at the edges of an objedct you see a double image shadow of sorts. I thought the above taa fixed that but I guess it weas something else...

    the starfixfixed the clouds as well have not seen the night sky yet..

    ReplyDelete
  53. You can try some things in the ini Files if you want but i dont expect any changes to your Problems. I will have a look at the remaining things.

    ReplyDelete
  54. yes I been shaderhacking looking for a fix.. there are 2 pressing issues, the halos around objects looking at the water and the Halo image when looking down and around but sometimes disapears real quick

    ReplyDelete
    Replies
    1. Need another day to check this, time is up for today. I have worked on the things ref. a iniversal transparency fix shader for 3.1 ^^ sorry

      Delete
  55. hey NP I am glad you are looking into this.. I also wanted to note the new update rebroke the skyfix I think??

    ReplyDelete
  56. Nope. Wasnt working in 2.1 too:-) as i noticed.

    ReplyDelete
  57. Hey Losti thank you for the update it seemed to have fixed the Sky in Ark Evolved ;)

    ReplyDelete
    Replies
    1. I have had a look @ this game. It's PRETTY OLD UE4-Engine (4.5.1.0)...Many RegEx will not match here but in general its all fixable. But many broken effects here using highest av. settings. May better on lower but this do not make things changing ref. the missing corrections needed. BUT i will not FIX this because I do not have any interest in this game and the time i have to spend would be pretty much for creating all the new RegEx just for this game or fix single shaders. SOORRY!!!

      Delete
    2. Especially for very old versions of UE4, try the DHR Universal UE4 fix, as it will be closer in time to the game itself and might have a regex that matches the shaders better.

      Any regex that no longer matches shaders has probably been removed, because even missed ones will impact performance a bit. Losti- might be worth considering if it's worth keeping the old regex live or maybe different versions like the Unity Universal setup. I'd like to see every regex live in your master UE4 Universal, but have not profiled if this has a performance impact. Or might conflict with other regex. Just something to think over a bit.

      Delete
  58. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. that is fine I will try and have a look. I put in an older UE4 fix and it did not work too well. it looks better with this ue4 fix currently.. I was wondering in 3.10 should the sky be fixed in Ark? I had it working the other day but now it seems broke again?

      Delete
  59. The old fix is integrated ans improved. Having s game with EFECT reg from the old fix having many false pos shaders and huge Performance impact. Halo Shader is not Universal, reflections missing or at surfaces depth....If ne new fix will not work the old will not work für sure. The Performance on the current fix is Bad until shaders are cached but becomes better the more you play. Thats what to Deal with having one fix for all. The old fix also so not have any feature like HUD fix or Auto depth. This game so mit suffer from false pos reg ex, it suffer from effects all fixed in the current fix but need new RegEx to catch. The Performance is of course bot lower than with the old fix if more effects fixed but thats highest arround 10 petcent, game dependend. The skycloudes cannot neue fixed with the new fix. Only removed using white overlay fix. It can ne pushed into depth but having halo. Seen some times im games but i cannot fix this.

    ReplyDelete
  60. It's strange but when I start 00_UE4-UniversalFix-2_Config.cmd in version 3.30 I get some kind of recursion (I even must restart PC to close cmd processes). Tested on Hellbound and Bulletstorm Full Clip Edition games

    ReplyDelete
    Replies
    1. P.S. Problem solved - I run it in 32bit version of Total Commander - In 64bit version and Windows Explorer all fine

      Delete
  61. Works like a charm with Paradise Lost. Thank you!

    ReplyDelete
  62. Losti ive tried to force full screen but still not able to activate 3d although other games are working fine in 3d like outer worlds and green hellhell but the medium and mortal shell are not shown in 3d more?
    I fail to understand what wrong I am doing.using 425.30 version of nvidia driver

    ReplyDelete
    Replies
    1. Have you tried alt enter and alt enter twice ?

      Delete
  63. Have you tried The config tool to Start those games ??

    ReplyDelete
  64. wonderful work and a huge thank's for what you are doing for 3D and UT4 which is used in lot of games.
    it's so sad that unity (universal patch) on which is based lot of good games is no longer tracked / updated. small duplications persist and prevent enjoyment of these games.


    ReplyDelete
  65. wow it's really become more playable. Now the gaming industry is clearly not moving towards 3d vision, and this is strange because obviously 4k and rays do not give such an impressive effect as 3d. Yes, 3d had problems, but they have become much less thanks to you.

    ReplyDelete
  66. does it make sense to try to apply this fix with another engine and which of the latest versions of windows can you recommend at the moment?

    ReplyDelete
    Replies
    1. No. Other game Engine will not work for sure. I use latest Windows 10 super slim ghostspectre

      Delete
  67. thank you! I really liked this build

    ReplyDelete
  68. Hello!
    I have a question,is there any fix for filickrin shadows,textures after manually disable TAA in UE4 games? I have this problem with shadow in every ue4 games ,like Sword and Fairy 7,Huan-Yuan 7.....is there any shadow fix for this? Reaaly thaks for any tips or fix! Cheers!

    ReplyDelete
  69. I tried applying the fix to Ace Combat 7 but it says Game Fix will not work. Re-install the fix, read the blog you missed something.

    Before this window, it tells me my driver is does not have 3D patched it. While it clearly does through 3DFM and your bringback3D program @Losti

    ReplyDelete
    Replies
    1. Game is not working with the Universal fix its special and needs extra fix of things. Sorry.

      Delete
  70. Hiya Losti, its Unity, I was hoping u would update the Terminator: Resistance with your new fixes and updates if possible? I'll donate to you for it. pls reply if possible as I'm replaying the game. So far no issues but since your universal fix is improving was hoping for an update. Thank u for all you do for us.

    ReplyDelete
    Replies
    1. Simply use the latest universal fix and get used to the configuration options. I have no time for a couple of months to do updates for fixes right now. But the new 9.00 may should do the HUD/UI switches i have added manually in this fix but not sure. Simply try the latest version and use the options i gave you from the OSD for HUD/UI depth customization.

      Delete
  71. I made a profile in 3dfix manager for kingdom hearts 3, then I installed the 3d fix that the program recommended, tried it and 3d vision kicked in but the stereo didn't, I'm using 3d vision 2 system by the way, then I just copied the files from your fix to the game folder and voila, I am playing Kingdom Hearts 3 in 3d .
    There is still some things to fix but so far this game looks gorgeous in 3d, thank you for all your work Losti, end everyone trying to keep 3d vision alive.

    ReplyDelete
  72. Thank you guys for the hard work
    I just have an issue with Call of the Sea that I need help with.
    I use GEO11 with RTX30xx, using direct_mode = nvidia_dx9
    And using this Unreal FIX_2_V9.04_20220718
    The game works perfectly nice, but when I pick up an object such as a letter to read, the whole screen becomes yellow until I put back the object.
    Do you know what may cause that and how to fix? I look at objects or solve puzzles because of the issue.
    Thanks,

    ReplyDelete
    Replies
    1. I think that is most likely a bug in the DX9 output handling, or something related to conversion to DX9 colorspaces. I get this mega-bloom effect in other games also. Still looking into it, no ETA right now. I'm fairly sure this is only seen in the nvidia_dx9 mode, nowhere else.

      Delete
    2. Yes exactly it's bloom effect, TY bo3b

      Delete
    3. Yes can confirm I encounter a similar bug on Star Wars Jedi Fallen Order, when in combat, using DX9 output.

      Delete
  73. Really cool update

    ReplyDelete
  74. https://www.mtbs3d.com/phpbb/viewtopic.php?t=26370

    , Unity

    ReplyDelete
  75. Can't make it work for the live of me. Any game just stays there "not responding".
    Im on w10 and 425.31. I've run every option from the 00_UE4-UniversalFix-2_Config and nothing.

    ReplyDelete
  76. Where is the link for 9.05? Can only find 9.04 and it's even corrupted link!

    ReplyDelete
  77. thank you very much for universal unreal engine fix, and for this latest update, it really makes every ue4 games using dx11 a blast to play :)

    ReplyDelete
  78. Where is the download link of the fix??

    ReplyDelete
  79. Can't find the download either. Going to the forum just goes to the game list thread but also there is no donwload link ot be found.

    ReplyDelete
    Replies
    1. Link is in the Installation section of the mtbs3d post.

      Delete
  80. does not work with abzu, the game runs in TAB but shaders are not fixed !

    ReplyDelete
  81. I just can't get it to work. in literally every game I put on full screen. If I deactivate 3Dvision, full screen also works. other UE4 games without universal patch run well. Unfortunately I can't find anything helpful about the error (lowlevel fatal error/lostdx3d device) anywhere, so I'll comment here. It's such a shame because so many games use this patch, unfortunately reinstalling Windows + drivers didn't help either.

    ReplyDelete
    Replies
    1. That low-level lost 3D Device error happens because you are using a driver past 425.31. Anything newer than that requires the Schwing hack, but that only works up to driver 452.06. You can add the global driver hack using 3DFM.

      After 452.06, NVidia destroyed the DX11 code path completely, so the only thing that works past that is DX9. Last video card that was fully compatible was 2080ti.

      geo-11 will run on any driver, but has limited output support for NVidia 3D Vision hardware and glasses. The nvidia_dx11 output mode requires a working DX11 3D Vision driver, so only works up to 452.06. The nvidia_dx9 output mode works on all drivers, but is not compatible with all games.

      Delete
    2. Hey dude, contact me at UnityBeing in discord - I'll provide u help for free. I was able to learn a lot of the limitations of dx9. If not, good luck.

      Delete
    3. I do not get it. Windows 11 reinstallation. 3dfixManager new. Change: Conan Exile no longer crashes with the error but Bioshock Inf. no longer runs. Arise still gives the Dx3d device lost error. I give up :) I'll play the games that are running and reinstall Windows at some point. Maybe I'll be lucky, or I'll find something else in the forum. I'm relatively new to the 3Dvision story but I'm so overwhelmed by it. Thanks for the answers and a big thank you to the people who keep 3Dvision alive

      Delete
    4. It's not Win11 that causes the problem, it's the NVidia video driver. You need to either use the old video driver, or use geo-11 for DX11 games (which has it's own different set of difficulties). If you have or get anything from 2080ti or earlier, things are much, much simpler to just use 452.06.

      Delete
    5. I use the 3Dfixmanager and use the driver installation from the tool. I probably have to take a closer look at the UE4universal fix. I'll browse the mtbs3d forum again in the next few days and do some research. My 2080ti is coming tomorrow and I'm excited to see what it will bring to the games that aren't running so smoothly at the moment. A Plaque Tale is doing very poorly. I've been using the 980 for the last few months, but last month I switched from a 1080p polarization monitor to a 1440p monitor with a 3dVision kit. thanks for the reply. It's great that 3D is kept alive. (Google translate)

      Delete
  82. how can I enable hunting mode and frame analysis dumps?

    ReplyDelete