Thursday, August 23, 2012

Darksiders 2



First i want to thanks eqzitara, half the credits go to him.

Update 21/08:
- Sky Fix

Fixed/Removed:
- Shadows removed (game looks better without shadows)
- Some effects removed and others fixed
- Ghosting fixed
- No Reflections flickering (at least i play severals hours and dont have this problem, please comment if you have this problem)

Remaining issues:
- icons enemies and crosshairs 2D (its not a big deal and difficult to fix for everyone)
- minor problems

Notes:
- Dont install the patch 1.01 I install this patch an can't go further in game in some point, so i have to unistall and install the game again without it.

Instructions:
- Rename .exe to "bmgame.exe" or use the Batman AA profile with Nvidia inspector (i try 5 profiles and this one get the best results. first i use the darksider 1 profile)
- Extract the content of the .zip where .exe is located.

I still playing this game, so if i find others problems and i can fixed i update the file.

Download Fix

GALLERY

57 comments:

  1. Hello there,

    i tried this fix. It's excellent so far.
    But i have a great problem. When i turn around the picture went darker, then lighter , then darker. It depends to the perspective.
    I have to say that i didn't rename the .exe
    This causes an error for me.

    It is a MUST to rename the exe? to make the fix work correctly ?

    And sorry for my school english ;-)

    ReplyDelete
    Replies
    1. Dhr: That i supose to be the flickering....happens in the entire screen or only in a wall or floor?

      Yes is a MUST. You have to add the profile from "batman arkham asylum" to Darksiders2.exe with Nvidia Inspector (here is an example with other game):
      http://www.freefalcon.com/forum/showthread.php/18680-How-to-Create-an-Nvidia-Profile-to-run-ffviper-exe-with-the-FalconAF-Gothic2-fix

      The other benefits i found with this profile is that make a great balance between cinematics/gameplay convergence.

      Delete
    2. Download nvidia inspector
      Open it click the wrench/screw driver icon
      click the batman arkham asylum in drop down tab
      Click the + (add application)
      Add Darksiders2.exe (wherever its installed)
      Click save


      If it says this application is tied to different profile
      Find it (probably darksiders2.exe)
      Click the - (remove application)
      click darksiders2.exe
      Save
      Then follow prior steps.

      Delete
  2. That i supose to be the flickering....happens in the entire screen or only in a wall or floor?

    Yes is a MUST. You have to add the profile from "batman arkham asylum" to Darksiders2.exe with Nvidia Inspector (here is an example with other game):
    http://www.freefalcon.com/forum/showthread.php/18680-How-to-Create-an-Nvidia-Profile-to-run-ffviper-exe-with-the-FalconAF-Gothic2-fix

    The other benefits i found with this profile is that make a great balance between cinematics/gameplay convergence.



    ReplyDelete
  3. you have no idea how mush i enjoy the game now , even i see more details in the game i never seen before the depth is perfect

    ReplyDelete
    Replies
    1. Great you enjoy the game with the fix....the game looks excellent in 3D.

      Delete
  4. I'm yet to finish the first game but I'll sure get it now that 3d works, thanks!

    ReplyDelete
  5. Thank You for Your great fix! I still have an issue that is quite annoying to me: The 2D "middleground" (e.g. the mountain peaks in the first area, the distant outline of the tree of live/death, etc.) is at wrong depth. It becomes obvious if You increase convergence. Can You observe this issue, too? Is there a way to fix it?

    ReplyDelete
  6. PS: You can observe the issue I mentioned if You look at this screenshot http://photos.3dvisionlive.com/DHR/image/502fdc7b378501ea60000010/ Compare the depth of the trunk of the tree of live and the depth of the firs: the trunk is closer than the firs although it should be in the background. As mentioned it becomes more obvious with 100% depth and increased convergence.

    ReplyDelete
    Replies
    1. Let me take a look if i can do something..... i play with 100% depth and 0 convergence on the main character, so i supose your're playing with a very high convergence.

      Delete
    2. Drop this (txt file) in the Vertexshaders folder and let me know....

      https://s3.amazonaws.com/dhr/5E655199.txt

      Delete
    3. I`m using a similar convergence... Maybe I'm very sensitive regarding depth anomalies ;) But especially in areas with extensive use of 2D scenery (Kingdom of Death/Eternal Throne or Lostlight) it was very obvious to me.
      But the fixed shader You made removed this issue :) Thanks a lot!!! I would recommend to include this shader in Your regular fix.
      Unfortunately I messed up my 99% savegame that allowed me to fast travel to any location by starting new game + :( So I only could test Forge Lands. Maybe You could also check Kingdom of Death and/or Lostlight to see if the fix also works in these areas...?

      Delete
    4. Is the shader that manage the entire sky.
      I update the File.

      Delete
  7. Thanks for the fix!

    Playing it now in 3D surround, it's great!

    Thanks for the effort!

    (when can I finally donate some real money? ;-))

    ReplyDelete
  8. Looks great, but I get the same flickering problem as reported by Andre Weiczorrek. I'm using a GTX 670 with beta driver version 304.79, could this be causing the issue?

    ReplyDelete
    Replies
    1. You add the profile from "batman arkham asylum" to Darksiders2.exe? (or rename)
      I also have a GTX670 using the 304.79 Beta Driver and i don't have this problem.

      Delete
    2. Yeah, I added the profile through nvidia inspector. However, there were two separate arkham asylum profiles in there:

      "Batman Arkham Asylum(BmGame.exe)"
      &
      "Batman: Arkham Asylum"

      I added darksiders2.exe to the first profile listed. I'll try switching it and see if that changes anything...

      Delete
    3. Steven....with the BmGame.exe profile you have the same flickering problem?

      Delete
    4. Yup. I've now tried with both of the profiles, and the results were the same, although "flickering" isn't really a very good description of the problem. It would be more accurate to say that when the lighting would change, such as coming out of a dungeon to an outdoor area, rather than fading between, the lighting shifts abruptly.

      It's really not a big deal, I just happened to be in a bad spot for it when I first applied the mod. Thanks for all your work on this!

      Delete
    5. Ah, I know why. I didnt really play game enough before I stopped playing it to see but I know why.
      Shadows can be used for things besides models. They are used for the gradual change from inside a dark cave to outside in the sun. No shadow = no gradual change.

      Delete
  9. @tamal
    For some reason your post isnt showing.
    Download nvidia inspector
    Open it click the wrench/screw driver icon
    click the batman arkham asylum in drop down tab
    Click the + (add application)
    Add Darksiders2.exe (wherever its installed)
    Click save


    If it says this application is tied to different profile
    Find it (probably darksiders2.exe)
    Click the - (remove application)
    click darksiders2.exe
    Save
    Then follow prior steps.

    ReplyDelete
    Replies
    1. NP.

      What happened to your comment? Only reason I know it came, is cause I have notification tell me when they are posted. I want to find out if its an error on blogspot or was deleted.

      Delete
  10. Hi. Love your site and use it often. The one thing I don't understand: You say not to install patch 1.01? Is this an official patch? I have it on Steam. If so, it's impossible to play without installing patches. Games won't launch until they're updated. Is this what you're talking about?

    ReplyDelete
    Replies
    1. If you dont run into an issue don't worry bout it. He ran into an issue where he couldnt progress in game, may not happen to you. I have no idea how to solve this problem if a steam user.

      By the way did you see the mass effect 2 update = )
      Fixed the glitch with spikes shooting out of models (was due to a conflict)

      Delete
    2. Paul, is a note related to game, no the 3D fix. The 3D fix works with or without the patch.
      At least for me i install the patch and in some point of the game i can't progress in game (i dont know why).

      Delete
    3. Guess I'll just give it a go then. It looks so great, I'll just roll the dice and hope for the best:) These Darksider games are just meant to be played in 3D.

      Delete
  11. Hi, I have your fix installed, and when I get to the Achidna fight the screen is totally black except for some glows on objects. Does anyone else get that?

    ReplyDelete
    Replies
    1. I'm very close to Achidna fight.... i will check when i get there.
      I look some video on youtube and the Achidna fight is in a very very dark place.

      Delete
    2. Yup I'm assuming that the lighting for that scene is from a deactivated shader.

      Delete
  12. Thanks for the fix. This is mostly working, but there's some flickering on the right side of the screen when I turn - I can see the game "build" the scene around the edges when I'm turning. I tried to record a video of it via fraps, but that actually caused it to start working! Then it stopped again when I turned off fraps :( I've installed the files, used Nvidia Inspector, etc. Any thoughts?

    ReplyDelete
    Replies
    1. What video card do you have and what version driver?

      Delete
    2. 560 ti SLI, v 304.79, i5 2500k, 8GB RAM, running @ 1080p. I've tried toggling vsync which has no effect.

      Delete
    3. Are you running any kind of overlay? Besides fraps.

      Disable steam community, xfire, etc

      Are we talking about frustum adjustment by any chance?(see nvidia control panel, set up stereoscopic shortcuts)

      Delete
    4. Also, Did you check to see if you have issue without the game fix?

      Delete
    5. Alright, I've tried disabling Steam community & Fraps, which had no effect. I tried adjusting the frustum, which apparently stretches the screen a bit. It helped somewhat because it was only happening on the right edge of the screen, but the problem is still there. I also tried removing the game fix, which had no effect (good news that it's not the game fix!). Interestingly, it's only happening on my left eye, and only on the right side of the screen. I'll keep digging...

      Delete
    6. Are you playing at a wierd resolution? Are you set to 120hz?
      Things that fraps does is cap hertz at whatever your recording at. Locks VSYNC.

      Can u take a pic?

      Delete
    7. This may sound dumb. Did you try alt tabbing? I wonder if when you turned on with fraps maybe it was just that. Then when you went to turn off you reset it.

      Delete
    8. Fraps is always enabled/running in the background. It's the video recorder that caused it to work. I'm running it at 1080p but I've tried reducing the resolution which had no effect.

      I just messed with the Nvidia config and screwed with some things that might help - maximum pre-rendered frames=2, adaptive v-sync, max performance power management mode. One of those seems to have fixed it! Thanks for pointing me down that path.

      Delete
    9. Its not that I didnt believe you but I had trouble believeing Fraps fixed it for you(made no sense) however...

      Same exact issue in Kingdoms of Amalur: Reckoning. Someone reported it a month ago and I had no idea what he was talking about. Then I started it up because I wanted to put a video preview up. Was recording in fraps. Didnt see what poster was talking about..... until I turned it off. Exact same issue. I gave him your solution so you helped him out. Thanks for reporting the solution.

      Delete
    10. I have the same issue when playing darksiders 1. You can see the world being build up at the sides of your screen. I think it's caused by SLI. If I turn SLI off it's gone.

      Delete
    11. yea but why does recording fix it/ what he did above?

      I think theirs something wrong with new drivers. I actually have spikes shooting out of models in certain games. (when up close to camera). Dragon age 2/ blades of time(that I know of).*shrug* It was so bad I thought something was wrong with graphics card.
      https://s3.amazonaws.com/3dvid/bladesoftime+2012-08-23+15-44-38-44.avi

      Delete
    12. I also hate turning SLI off. Its such a problem to remember to turn it back on. I once had it off for a few weeks. Id rather record at 1fps lol. Id recommend to do that instead.

      Delete
    13. nm... u can set a game to a single gpu... I wish I knew that.

      Delete
  13. This comment has been removed by the author.

    ReplyDelete
  14. Would you be able to do a mod that just turns off the shadows and the effects? I've been looking around for a way to improve performance by getting rid of these ugly "eye candies" and your mod seems to be the one closest to an answer. Would donate if you are able to help. :) My email is sgseals@hotmail.com and I am active on the darksiders official forum in case you need to get in touch with me directly. Thank you so much.

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
    2. LOL, I responded to post then got what your saying. Your a 2D user?
      We tried this before a 2D user, it doesnt work. The modder made this wrapper just for 3d users,(basically our files look different then your files).
      IF you want to do it yourself. Here,
      http://helixmod.blogspot.com/2012/04/how-to-guide-remove-effects-from-game.html

      But in all honesty, make sure you have newest driver / newest patch. Game is not very graphically intense.

      Delete
  15. Hello my problem is when i going to execute the gilded arena boss,it can't be execute i think i try about 10 times per day

    ReplyDelete
    Replies
    1. This is a 3d vision mod page. You need tech support.

      Delete
  16. I too have the flickering problem :( FPS is even worse...

    ReplyDelete
  17. Thanks too much.Really increased FPS no flickering problems until now.Keep up the good work :)

    ReplyDelete
  18. Hey can you make a version of this mod for Deathinitive edition. With removed shadow and all...Thank you

    ReplyDelete
  19. Hey buddy. My English is a little bit bad. But I try to explain what issue I've got then I used this fix. I have something like Shadows and lights blinkind all the time, wich makes my PC crying from overload :< Realy want to disable shadows. This is the only threat betven me and 60fps gameplay. Please help me!

    ReplyDelete
    Replies
    1. I assume that you don't care about the 3D fix itself. If you want to disable shaders, that is definitely possible, but too complex for a short comment. However you can learn how to do this. Go to Bo3b's School for ShaderHackers. It's oriented around fixing things for 3D, but you can learn enough to make your own performance fixes.

      Delete
  20. I appreciate your reply. But I dont have enough lang knowledge for this complex actions :<. I was hoping that somebody already knows how to do this, and could send me a fix. Anyway, thank you very much for the information.

    ReplyDelete