Tuesday, September 10, 2013

Deadpool

Deadpool
 
Fixed: 
Shadows, non-sli issues, hud changes, lensflares, cinematic issues, etc
Optional:
Turn off Health bars with F6
Issues Remaining*IMPORTANT*
Their is a rare glitch that sometimes occurs when you first start game that causes 3D hud to not load properly at game start.
You can tell if this happens as soon as game starts by clicking CAMPAIGN on menu screen. If on this screen Campaign looks distorted [SEE PICTURE]. Relaunch game.

To change cinematic depth/convergence. Click F3 then adjust, save with F7
To change gameplay depth/convergence. Click F4 then adjust, save with F7
[You may need to relaunch game once for new settings to apply. If you wish to change/disable/have a question about this feature read this GUIDE]

If interested in my thoughts/optimizations on the game check my blog post HERE

Required Installation
Must use a controller
[Non-steam version]Rename Deadpool.exe to AION.EXE  OR
[Steam version] Download Nvidia inspector. Remove Deadpool.exe from DeadPool profile and add to AION PROFILE. [Guide here]

Install to.. /Dead Pool/Binaries/
[SLI USER VERSION] 
SHADEROVERRIDE

[NON-SLI USER VERSION]
Seperate installer nothing is changed except DO NOT ALT TAB!
SHADEROVERRIDE

============================================
If you like this fix I accept Paypal Donations at EQZITARA@YAHOO.COM or my PATREON.
Please keep in mind I am only one person at helixmod and all donations will go only towards myself.
Thank you for your support.
Posted by

56 comments:

  1. eqzitaraJune 27, 2013 at 3:21 AM

    I didnt mention it in notes because it may cause some confusion. I did remove some shadows but the only time I saw them were in dead pools room.[I played next 2 levels and didnt see them] Just mentioning it here.

    ReplyDelete
  2. UnknownJune 27, 2013 at 9:07 AM

    Thanks Eqzitara! I was playing around with the game for the last 2 days and noticed that it seems to use the same engine from Transformers Fall of Cybertron, in fact the game files folder is still labelled TransGame and I've had pretty good results using the fix from tfoc on Dead pool, but I can't wait to get home and try your fix. Also, I've found a tool that will enable you to decrypt/re-encrypt the coalesced.ini file so we can make settings changes, although i was looking for the settting for self-shadows but couldn't find it. I'll post a link to it when I get home. Thanks again for all your hard work and contributions to our little 3d vision community, without you, Helix, DHR, Chiri and others we'd really be up shit's creek.

    ReplyDelete
    Replies
    1. eqzitaraJune 27, 2013 at 10:35 AM

      Speaking of tfoc, i forgot to write change game's exe -> prototype.exe.

      Delete
    2. eqzitaraJune 27, 2013 at 11:01 AM

      Also,
      I am fixing shadows/hud of tfoc when I get time today.

      Delete
    3. UnknownJune 28, 2013 at 12:08 PM

      Here's the link to the tool to decrypt/re-encrypt the coalesced.ini file:
      http://dl.dropboxusercontent.com/u/62858477/TWfC_util.exe

      Delete
  3. UnknownJune 27, 2013 at 1:34 PM

    Sweet! Thanks again, I haven't had a chance to play passed the 2nd level in tfoc and I'm sure your added HUD adjustments will be a great addition to the current fix

    ReplyDelete
    Replies
    1. eqzitaraJune 27, 2013 at 2:54 PM

      Well im not gonna go nuts tbh, Im just gonna balance it out. Like Borderlands 2 kind of.

      Delete
    2. eqzitaraJune 27, 2013 at 4:36 PM

      Its up but tbh I didn't do too much. Its not my fix and that hud doesnt look like fun times. I may of tried at release but not now. I only did it cause I asked dhr a few weeks ago if I could update it.

      I actually was 90% certain deadpool would use exact same everything as TFOC so I guinea pig fixed shadows in it beforehand.

      Delete
  4. DHRJune 27, 2013 at 5:58 PM

    Thanks Eqzitara!!! but i cant donwload the fix (make public perhaps)...

    ReplyDelete
    Replies
    1. eqzitaraJune 27, 2013 at 7:05 PM

      gimme 30 mins. trying to fix something.

      Delete
    2. eqzitaraJune 27, 2013 at 7:18 PM

      ill bring it up but let you know if I fix it. Its not too huge.

      Delete
    3. eqzitaraJune 27, 2013 at 7:35 PM

      Fixed. Lol I was trying to figure out why deadpool was having the issue in cinematics but not transformers... Depth of field/motion blur caused glitches, fun times.

      Delete
  5. isaacvigoJune 27, 2013 at 6:10 PM

    I can´t download this fix also.... (not alowed)

    ReplyDelete
    Replies
    1. eqzitaraJune 27, 2013 at 7:05 PM

      gimme 30 mins. trying to fix something.

      Delete
    2. eqzitaraJune 27, 2013 at 7:18 PM

      ill bring it up but let you know if I fix it. Its not too huge.

      Delete
    3. isaacvigoJune 28, 2013 at 7:28 AM

      Thank you.
      Seems better with fix.

      Delete
  6. isaacvigoJune 28, 2013 at 7:36 AM

    Iwould like to ask you about one cuestión...
    Im making a web page to help people with issues on their games,its an open comunity and ive a section about 3d, my web page is in spanish linguage, and i would like to post some of your fixes there...
    The question is that is for spanish people, then my idea is to post it in spanish and i will send them to your blog also, can i do it?
    the web is under construction (gameriam.net)
    Please , let me know, how can i do, becouse i think your fixes are something very interesting for players in 3d

    ReplyDelete
    Replies
    1. eqzitaraJune 28, 2013 at 9:54 AM

      Files stay here and name of person who made patch gets mentioned on page.

      Besides that you can do what you want.

      Delete
    2. eqzitaraJune 28, 2013 at 9:55 AM

      The problem is though is I can fix issues, explain how to solve better then anyone besides helix. I cant really see those comments.

      Delete
    3. eqzitaraJune 28, 2013 at 10:11 AM

      I guess the best solution is to put a link to the game page.

      Delete
    4. isaacvigoJune 28, 2013 at 11:49 AM

      Ok thats how i think abut...
      I send you this link ... so you can tell me
      http://www.gameriam.net/grupos/jugando-en-3d/forum/topic/deadpool-fix/

      Delete
    5. isaacvigoJune 28, 2013 at 11:54 AM

      I make a translation there and a link to this the original page

      Delete
    6. eqzitaraJune 28, 2013 at 4:06 PM

      Sure.

      Delete
  7. DHRJune 28, 2013 at 4:24 PM

    eqzitara...do you have some floor reflection issues (2D reflections) in the beginning of the game? i'm using the last Beta driver, maybe is that ¿?

    ReplyDelete
    Replies
    1. eqzitaraJune 28, 2013 at 4:31 PM

      nope, SLI/Non-sli?

      Delete
    2. eqzitaraJune 28, 2013 at 4:34 PM

      Also did you rename to prototype.exe?

      Delete
    3. DHRJune 28, 2013 at 4:46 PM

      No-SLI and yes rename to prototype.exe

      Delete
    4. eqzitaraJune 28, 2013 at 4:51 PM

      ill have to disable and see.

      Delete
    5. DHRJune 28, 2013 at 6:41 PM

      I disable that shader (its 699 VS)..

      Delete
    6. eqzitaraJune 28, 2013 at 6:43 PM

      Its only happens on non-sli. I got to see if I can sort it out.

      Delete
    7. eqzitaraJune 28, 2013 at 6:43 PM

      can you post that shader here in case someone else stumbles into it before I fix it?

      Delete
    8. DHRJune 28, 2013 at 7:01 PM

      Yes...of course: https://s3.amazonaws.com/dhr/85E60A00.txt

      add to Vertexshader folder.
      this reflection issue have to be fixed through PS.

      Delete
    9. eqzitaraJune 28, 2013 at 7:11 PM

      Nope. Dx9settings.ini just fixed it. However alt tab breaks fix by doing it.

      Hopefully it doesnt cause issues but I have that shader for a plan B now, ty.

      Delete
    10. eqzitaraJune 28, 2013 at 7:11 PM

      Also a new file is up.

      Delete
    11. DHRJune 28, 2013 at 7:30 PM

      The SurfaceCreation mode works perfect..... relfections fixed! Thanks

      Delete
    12. eqzitaraJune 28, 2013 at 7:36 PM

      Unfortunately the friggin hud is different in non-sli. Im gonna leave it since its not too bad.

      Delete
    13. eqzitaraJune 28, 2013 at 7:36 PM

      [I didnt know till I went to fix reflections]

      Delete
  8. XarrdroidJune 28, 2013 at 6:35 PM

    I had some minor ghosting issues and just used the Aion profile instead of prototype. I have a 590 so it may be that or I am running the latest 320.49 beta drivers so that may have affected my ability to use the prototype.exe profile in inspector.

    Also, I am using 4x msaa and 4xsgssa with aa bits as follows:
    0x000012C1

    Looks great!

    Great work and thank you again Eqzitara!!!

    ReplyDelete
    Replies
    1. eqzitaraJune 28, 2013 at 6:42 PM

      It may of been related to AA settings. I have had that happen before. I beat game on prototype.

      Delete
    2. XarrdroidJune 28, 2013 at 6:49 PM

      True that. Meant 4x SGSSAA. Try those aa bits Eq. I know you beat the game, but just to see the difference the AA settings make. I think a noticeable difference with the sparse grid super sampling enabled. I am using im combination with sweetfx 1.4 and looks simply amazing on PJ 720p 3dtv play.

      Thanks bud and have a great weekend :)

      Delete
    3. eqzitaraJune 28, 2013 at 7:13 PM

      it 100% does, its how I play all my UE3 games. I am redoing my cooling on my computer so didnt mess with it. Ill change instructions to aion.exe

      Delete
  9. misterbambamJuly 14, 2013 at 1:10 PM

    Hi, seems to have issue with the "aquarium" with the shark in the first level. When i look at it, all is blue in one eye and all is good in the other eye. Is that normal ?
    Thanks

    ReplyDelete
    Replies
    1. eqzitaraJuly 14, 2013 at 2:22 PM

      The aquariam was weird because its like 2 different effects combined. Either one is fine by itself. At some angles its right, some it isnt. Outside of this area I cant recall ever running into any issues besides a 2 second glitch in a cinematic.

      Delete
    2. misterbambamJuly 14, 2013 at 2:51 PM

      Ok thanks for the answer !

      Delete
  10. DeadPoolJuly 15, 2013 at 1:11 AM

    DeadPool looks nice in 3D.

    ReplyDelete
  11. UnknownSeptember 17, 2013 at 5:37 AM

    Thank you. You rock.

    ReplyDelete
  12. AnonymousDecember 3, 2013 at 2:27 PM

    Does the game auto change between gameplay and cutscenes or do I have to hit F3/F4 each time?

    ReplyDelete
  13. UnknownDecember 4, 2013 at 2:11 AM

    Thanks for the great fix, looks awesome in 3D Vision

    ReplyDelete
    Replies
    1. eqzitaraDecember 4, 2013 at 2:55 PM

      Glad you like. Very underrated game imo.

      Delete
    2. UnknownJuly 24, 2014 at 6:33 AM

      This is probably the most underrated game of the last couple of years, imho. Friggin' hilarious. Thanks for the fix!

      Delete
  14. drastic00June 15, 2019 at 2:02 PM

    Hey Man, Thanks for this fix! Just got a hold of this one (6-19), looking great in 3D as usual. It is nigh on impossible to find this game now, even from less-than-reputable sources :) What a shame...

    ReplyDelete

Subscribe to: Post Comments (Atom)