DiRT 4.0 - 3D-Fix - Losti - V1.0

DiRT 4.0 - 3D-Fix - Losti - V1.0

***This fix was made by Losti***

---------LATEST official 3D-Vision-Geforce Driver: 425.31----------

You can install 3D-Vision for the lates driver using this Method discriped here: https://www.mtbs3d.com/phpbb/viewtopic.php?f=105&t=23277

Optional donation:

If you like the fix and want to contribute for more future fixes, you can donate here: http://paypal.me/Losti3D

Special Thx goes to:

DarkStarSword  - for everything you did for this small but nice 3D-Community and of cause your personal support!!!

                           

masterotaku      - for guiding me with his knowledge and be present all the time for my questions!!!! THY MATE!!!!

_________________________________________________

--- ~8 hrs time of development later ---                      

_________________________________________________

Latest Update: V1.00 - 15.07.2019

-  Release 

1.  Fixed

- HUD (Losti)

- Shadows (Losti)
- Smoke and Dust (Losti)

2.  Issues left

- some hands on for you for the HUD (see key settings)
- lesn flairs @ screen depth
- some shadow problems with (far away and some strange movement i cannot fix)

You have other issues? --- please privide a screenshot and a savegame to rauti@inetmx.de

3.  Download

- DiRT 4.0 - 3D-Fix - Losti - V1.0

4.  Introduction to get it working

- uninstall old fixes!!! ... if you have used a WIP or updating to the latest fix if there is an update

- install the latest NVIDIA driver (latest confirmed working driver: 425.31)
- extract the archive to the root game directory
- if you have troubles, please make sure you clean install the fix/game or and the graphic driver (use DDU for the driver cleanup)

==> if you have any trouble or issues you cannot solve please do not hesitate to contact me via my PayPal donation address, or in the 3D-Vision-Forum

4.1  Ingame Settings

- Everything you want (I think) .... developed with maxed out settings

- disable motion blure

5.  Key Settings

5.1  Key Settings (Keyboard + Mouse Gameplay)

"1"

-  this is a cycle key
-  cycle between menu-depth and driving depth for the HUD

"2"

-  this is a cycle key
-  more or less HUD-Depth for you -- adapt HUD-Depth to your likes

"3"

-  this is a toggle key
- on/off for some strange effect with the shadows if your care is broken (dont know if its necessary)

5.2  Key Settings (Controller Gameplay)

"XB_GUIDE"

-  this is a cycle key
-  cycle between menu-depth and driving depth for the HUD

"XB_LEFT_SHOULDER + XB_RIGHT_SHOULDER" (LB + RB)

-  this is a cycle key
-  more or less HUD-Depth for you -- adapt HUD-Depth to your likes

6.  Key Setting - Customization

----only for more advanced users---

If you don’t like the settings the fix comes with, you have to find your own likes:

- to watch your current convergence/separation set hunting=1 in d3d11.ini

- change constants/settings/keys and check the result in game by pressing F10

6.1  3Dmigoto - Constants

----only for more advanced users---

- the fix comes with the following default constant settings:

;;;HUD DEPTH
x = 0.3

;;;HUD depth adjustment
x1 = 1.0

;strange thing disable enable
x20=1.0

;mousescale
z1=0.3
z2=1.0

6.2  Advanced Key Config

----only for more advanced users---

You can define keys in [Constants] section with:

[KeyWHATEVERYOURNAMEIS]

Key = KEY 

CONSTANTX = XXX

SEPARATION = SEPXX

CONVERGENCE = CONVXX

- for choosing a key look here for replace KEY with it (http://msdn.microsoft.com/en-us/library/windows/desktop/dd375731(v=vs.85).aspx)

- replace CONSTANTX with the constants written above

- replace XXX with a value, see above

- replace SEPXX with a separation value, leave it = the separation you choose by STRG+F3/4, no changes, 100 = 100%

- replace CONVXX with a convergence value, leave it = the convergence you choose by STRG+F5/6, no changes

Key Press Types:

- type = hold ==> only active while holding this key

- type = toggle ==> enable/disable this setting

- type = cycle ==> cycles the settings via this key, e.g. SEPARATION = 100, 50 will cycle between 100% and 50% separation pressing this key

--if you have more settings you need to define it for every cycle step:

--means: if you want to change separation and you want to use the same constant for both settings use:

SEPARATION = X1, X2

CONSTANTX = XXX, XXX

- no definition = settings set on ON once pressed the key

You can also change any existing key definitions changing the key behind key = in the d3dx.ini .... if you like the setting but want another key for it.


Acknowledgements

- THANK you DSS for being on this earth :-)
- THANK you masterotaku for being on this earth :-)
- Big thanks to Bo3b, DarkStarSword, Flugan and all others involved in creating 3DMigoto; an amazing wrapper that allows us to fix our favorite DX11 games in 3D Vision!
- NVIDIA for creating 3D-Vision as a tech!